Table of Contents
Advertisement
Network Camera User Manual
Online Upgrade
For some camera models, when memory card is mounted, you can click the Update button
that appears on the right of Firmware Version text field to see if there is a new version
available. If a new version is available, the version number will be displayed in the New
Version text field below, and you can click the Upgrade button to upgrade the firmware for
the camera.
Figure 6-3 Online Upgrade
Note:
When the camera is upgrading, don't power off the camera. During upgrading, the
camera may not be accessible. You need to wait 1 or 2 minutes before the upgrade finishes.
6.2.2
Configuring Time Settings
Purpose:
You can follow the instructions in this section to configure the time synchronization and DST
settings.
Steps:
1. Enter the Time Settings interface, Configuration > System> System Settings > Time
Settings.
43
Hide quick links:
Advertisement
Table of Contents
