Face Capture - Hyundai NextGen User Manual

1. Check the checkbox of Global Size Filter to enable the function.
2. Select the Filter Type as Actual Size or Pixel.
Actual Size: Input the length and width of both the maximum size and the minimum
size. Only the target whose size is between the minimum value and maximum value will
trigger the alarm.
Notes:
● Camera calibration has to be configured if you select the filter by actual size.
● The length of the maximum size should be longer than the length of the
minimum size, and so does the width.
Pixel: Click Minimum Size to draw the rectangle of the min. size on the live view. And
click Maximum Size to draw the rectangle of the max. size on the live view. The target
is smaller than the min. size or larger than the max. size will be filtered.
Notes:
● The drawn area will be converted to the pixel by the background algorithm.
● The global size filter cannot be configured if the live view is stopped.
● The length of the maximum size should be longer than the length of the
minimum size, and so does the width.
3. Click Save to save the settings.

10.3.2 Face Capture

Face capture can capture the face appears in the configured area, and the face characters
information, including the age, gender, and wearing glasses or not will be uploaded with the
captured picture as well.
Overlay & Capture
Display information includes the display on picture and display on stream.
Display VCA info. on Stream: The green frames will be displayed on the target
Network Camera User Manual
134