Appendix 2 Port Mapping - Hyundai NextGen User Manual

Appendix 2 Port Mapping

The following settings are for TP-LINK router (TL-WR641G). The settings vary depending
on different models of routers.
Steps:
1. Select the WAN Connection Type, as shown below:
Figure A.2.1 Select the WAN Connection Type
2. Set the LAN parameters of the router as in the following figure, including IP address
and subnet mask settings.
3. Set the port mapping in the virtual severs of Forwarding. By default, camera uses port
80, 8000 and 554. You can change these ports value with web browser or client software.
Example:
When the cameras are connected to the same router, you can configure the ports of a
camera as 80, 8000, and 554 with IP address 192.168.1.23, and the ports of
Network Camera User Manual
Figure A.2.2 Set the LAN parameters
168