Chapter 7 Network Settings; Configuring Basic Settings; Configuring Tcp/Ip Settings - Hyundai NextGen User Manual

Chapter 7 Network Settings

Purpose:
Follow the instructions in this chapter to configure the basic settings and advanced settings.

7.1 Configuring Basic Settings

Purpose:
You can configure the parameters, including TCP/IP, DDNS, PPPoE, Port, and NAT, etc.,
by following the instructions in this section.
7.1.1

Configuring TCP/IP Settings

Purpose:
TCP/IP settings must be properly configured before you operate the camera over network.
The camera supports both the IPv4 and IPv6. Both versions can be configured
simultaneously without conflicting to each other, and at least one IP version should be
configured.
Steps:
Enter TCP/IP Settings interface: Configuration > Network > Basic Settings >
1.
TCP/IP
User Manual of Network Camera
60