Hyundai NextGen User Manual page 133

Detection Sensitivity [0~4]: Refers to the sensitivity of the camera detects a target. The
higher the value, the easier a target be recognized, and the higher the misinformation is. The
default value of 3 is recommended.
Background Update Rate [0~4]: It refers to the speed of the new scene replaces the previous
scene. The default value of 3 is recommended.
Single Alarm: If single alarm is selected, the target in the configured area will trigger the
alarm for only once. If it is not checked, the same target will cause the continuous alarm in
the same configured area.
Leave Interference Suppression: Check this checkbox to stop the interference caused by
the leaves in the configured area.
Output Type: Select the position of the frame. Target center, bottom center, and top centers
are selectable. E.g.: The target will be in the center of the frame if target center is selected.
Restore Default: Click to restore the configured parameters to the default.
Restart VCA: Restart the algorithms library of behavior analysis.
● Global Size Filter
Note: Compared with the size filter under rule, which is aiming at each rule, the global
size filter is aim at all rules.
Steps:
Network Camera User Manual
Figure 10-29 Advanced Configuration
133