Configuring 802.1X Settings - Hyundai NextGen User Manual

2. Configure the QoS settings, including Video/Audio DSCP, Event/Alarm DSCP and
Management DSCP.
The valid value range of the DSCP is 0 to 63. The bigger the DSCP value is, the higher
the priority is.
Note: DSCP refers to the Differentiated Service Code Point; and the DSCP value is
used in the IP header to indicate the priority of the data.
3. Click Save to save the settings.
Note: A reboot is required for the settings to take effect.
7.2.8

Configuring 802.1X Settings

Purpose:
The IEEE 802.1X standard is supported by the network cameras, and when the feature is
enabled, the camera data is secured and user authentication is needed when connecting the
camera to the network protected by the IEEE 802.1X.
Before you start:
The authentication server must be configured. Please apply and register a user name and
password for 802.1X in the server.
For your privacy and to better protect your system against security risks, we strongly

recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower case letters,
numbers and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility

of the installer and/or end-user.
Steps:
1. Enter the 802.1X Settings interface, Configuration > Network > Advanced Settings
> 802.1X
Network Camera User Manual
79