Configuring Net Hdd - Hyundai NextGen User Manual

11.3 Configuring Net HDD

Before you start:
The network disk should be available within the network and properly configured to store the
recorded files, log files, pictures, etc.
Steps:
1. Add Net HDD.
(1) Enter the Net HDD settings interface, Configuration > Storage > Storage
Management > Net HDD.
(2) Enter the IP address of the network disk, and enter the file path.
(3) Select the mounting type. NFS and SMB/CIFS are selectable. And you can set the
user name and password to guarantee the security if SMB/CIFS is selected.
Note: Please refer to the NAS User Manual for creating the file path.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers and special characters) in order
to increase the security of your product.
Proper configuration of all passwords and other security settings is the
Network Camera User Manual
Figure 11-6 Add Network Disk
152