Table of Contents
Advertisement
7.1.5
Configure NAT (Network Address Translation) Settings
Purpose:
NAT interface allows you to configure the UPnP™ parameters.
Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility
among networking equipment, software and other hardware devices. The UPnP protocol
allows devices to connect seamlessly and to simplify the implementation of networks in the
home and corporate environments.
With the function enabled, you don't need to configure the port mapping for each port, and
the camera is connected to the Wide Area Network via the router.
Steps:
1.
Enter the NAT settings interface. Configuration > Network > Basic Settings >
NAT.
2.
Check the checkbox to enable the UPnP™ function.
3.
Choose a nickname for the camera, or you can use the default name.
4.
Select the port mapping mode. Manual and Auto are selectable. And for manual port
mapping, you can customize the value of the external port.
5.
Click Save to save the settings.
Network Camera User Manual
Figure 7-8 UPnP Settings
67
Hide quick links:
Advertisement
Table of Contents
