Road Traffic - Hyundai NextGen User Manual

camera treats the cabinet (on which the good removed) as a new scene. The default
value of 50 is recommended.
Scene Change Level [0~100]: It refers to level of the camera responses to the
dynamic environment, e.g., a swaying curtain. The camera may treat the swaying
curtain as a target. Setting the level properly will avoid the misinformation. The
default level is 50.
Minimum Target Size [0~100]: It refers to the size of the camera identify a target.
You can set the target size according to the actual environment. The default size is
50.
Target Track: Select ON or OFF to enable or disable the tracking of the target.
5. Go to Arming Schedule tab, and click-and-drag the mouse on the time bar to set
the arming schedule.
6. Go to Linkage Method tab, and select the linkage method by checking the
checkbox of notify the surveillance center.
7. Click Save to save the settings.
Note:
The heat map statistics will be calculated under Application tab. Go to Application to
check the heat map statistics.

10.3.6 Road Traffic

Purpose:
Vehicle Detection and Mixed-traffic Detection are available for the road traffic monitoring.
In Vehicle Detection, the passed vehicle can be detected and the picture of its license plate
can be captured; besides, the vehicle color, vehicle logo and other information can be
recognized automatically. In Mixed-traffic Detection, the pedestrian, motor vehicle and non-
motor vehicle can be detected, and the picture of the object (for pedestrian/non-motor
vehicle/motor vehicle without license plate) or license plate (for motor vehicle with license
plate) can be captured. You can send alarm signal to notify the surveillance center and upload
the captured picture to FTP server.
Network Camera User Manual
144