Starting/Ending Standby; Preparing The Mr System - Siemens MAGNETOM Skyra fit Operator's Manual

MAGNETOM Skyra fit | syngo MR E11
Print No. M6-04401.621.02.02.02
3 Select the Shutdown System option.
The computer system shuts down.

In case of problems during shutting down, see troubleshooting
information:

Starting/ending Standby

5.2.4
Standby can be switched on by using the System Manager in the
syngo MR software. See:
1 Select System > Control to open the System Manager.
2 To start Standby: On the Meas & Recon tab, click the Standby
button.
The System Manager - Scanner StandBy dialog box opens.
3 To end Standby: At the alarm box, press the SYSTEM ON button.
5.3

Preparing the MR system

To use the holder for infusion bottles you can position the rod on the
right side of the patient table (head end). If not in use, you can clamp
the holder in the affixing elements at the side of the table.
MR system operation
( Page 103 Shutting down the computer system)
Software operator manual
5
105