Configuring the Cradle
2.4 Restart Cradle
Menu item 4 (see Figure 77) is used for restarting the cradle.
Restart Cradle
FIGURE 77.
2.5 Set Date & Time
Menu item 5 enables the user to set the date and time of the Cradle. This function is disabled if the
cradle is configured to use SNTP.
The time should be entered in the following format: yyyy/mm/dd hh:mm with:
• Four digit year
• Two digit month
• Two digit day
• Two digit hour in 24-hour format
• Two digit minutes
Note that entering seconds is not supported by this interface.
159