Resetting The Hc700-G - Motorola HC700-G User Manual

Resetting the HC700-G

You may need to reset the HC700-G; for example, you
may need to reset due to communication cut-off, or if the
operating system or the application stops responding.
If the HC700-G stops responding, perform the steps
described on the following page.
Warm Reset
Important Note: When the HC700-G performs Warm
Reset, all recorded information remains stored in
memory.
Hold down the <ESC> and <A> and <F> keys (see
Figure 19) for at least 5 seconds - the Motorola logo will
show on the screen for about 30 seconds and then Windows Mobile desktop or application screen will
appear - the HC700-G functions again. Warm Reset can also be performed in the following way: go to:
Start Menu > TaskManager and tap on "Soft Reset".
If the HC700-G still does not respond, perform "Cold
Reset":
Cold Reset
Cold Reset restarts the HC700-G by erasing all stored
records and entries.
Do Not perform Cold Reset unless Warm Reset fails to
solve the problem.
Hold down the Power Button and <S> and <X> keys for
at least 5 seconds (see Figure 20); the HC700-G will
restart its operating system. Cold Reset can also be
performed in the following way: go to: Start Menu >
TaskManager and tap on "Cold Reset".
LED Indications
Warm Reset - Key Combination
FIGURE 19.
Cold Reset - Key
FIGURE 20.
39