Table of Contents
Advertisement
Tap Select Networks.
2.
In the appropriate lists, select My ISP or My Work Network.
3.
Enter new settings
A wireless network can be added either when the network is detected, or manually by entering settings
information.
To manually enter information, tap Start > Settings > Connections tab > Wi-Fi > Wireless tab.
1.
Note that your device may say Wireless Ethernet or Network Cards instead of Wi-Fi.
Tap Add New. If the network was detected, tap the network name.
2.
In the General tab, enter a network name. If the network was detected, the network name is entered
3.
automatically and can't be changed.
In Connects to, select what your network connects to, Work or My ISP. To connect directly to
4.
another computer instead of a network access point, select the This is a device-to-device (ad-hoc)
connection check box.
Log on to network services
Before you begin, obtain the following information from your network administrator: user name,
password, and domain. Some certificates do not require a password.
Enter your user name, password, and domain.
1.
To save your password so that you will not be prompted each time you connect, select the Save
2.
password check box.
Note: Certificates already configured for this network should be automatically selected by your device.
If a certificate cannot be automatically selected, you will be prompted to select the necessary
certificate.
Set up a modem connection
Before you begin, obtain the following information from your Internet service provider (ISP) or
wireless service provider: ISP server phone number or access point, user name, and password.
Tap Start > Settings > Connections tab > Connections.
1.
91
Advertisement
Table of Contents
