Table of Contents
Advertisement
Using the Keypad
The HC700-G keypad enables the user to enter both alphabetic and numeric data to the software
application. However, since the keypad can only contain a limited number of keys, some special keys
are assigned to perform special tasks that are usually found on full-size computer keyboards. These are
produced using a combination of the existing keys on the HC700-G keypad.
Two sets of keys exist on the HC700-G:
Keys active when in Alphabetic mode, which are those seen on the overlay of the HC700-G key-
1.
pad.
Keys active when in Shift or Function mode which are those seen next to each key on the HC700-G
2.
keypad panel.
Press the
key to toggle between the Alphabetic and Numeric keypad modes. Figure 15 shows
<SHIFT>
the HC700-G keypad and Table 3 describes the HC700-G key assignments.
Application Key
TAB/Send Key
Function Key
Main Scan/
Picture Button
Backspace Key
LED Indications
4-Way Navigation Key
FIGURE 15.
Enter Key
HC700-G Keypad
Escape Key
End Key
Shift key
Space Key
33
Advertisement
Table of Contents
