Table of Contents
Advertisement
Status LED indications when HC700-G is docked inside the cradle
The Status LED indications, when HC700-G is docked inside the cradle, are listed in Table 2
Status LED indications when HC700-G is docked in the Cradle
TABLE 2.
Status
Steady red
Steady green
Flashing amber
Flashing red/green
The Application LED
The Application LED (see Figure 14) may be used for any
kind of application notification. For example; the LED may
show communication indication when the application
establishes connection with a host computer or indicate an
alert that needs to be handled. For more information, refer to
your software application guide and to the HC700-G
Software Development Kit (SDK).
The Software Development Kit (SDK) information can be
found at: https://developer.motorola.com/.
32
Using the HC700-G
Description
Battery is charging
Battery is fully charged
1. Battery temperature is out of range - battery charging has stopped. Charging
will resume when battery temperature is within range.
2. Battery Voltage is out of range (drained battery). The cradle will attempt to
initiate charging for 20 minutes and than stop if unsuccessful.
Charging error/defective battery.
Remove the HC700-G from the cradle and dock it back again.
If the LED begins to flash red/green, within 20 minutes, replace the battery.
Application LED
Application LED
FIGURE 14.
Advertisement
Table of Contents
