Scanning With Laser Aimer Imager - Motorola HC700-G User Manual

Scanning with Laser aimer imager

To scan a barcode or capture an image, perform the following:
Run the Bcr barcode reader application: Start Menu -> Programs -> Sample Applications -> Bcr.
1.
Aim and hold the HC700-G at about 7 inches from the target.
2.
Press one of the Scan/Picture keys and adjust your position to place the emitted red pattern at the
target.
Note: When adjusting your position, you may rotate the wrist left or wright and pitch by dropping or
lifting the wrist. Move back or forth from the target to capture the entire object. A successful scan is
followed by a beeping sound
About 7 inches from barcode
Aim the Laser pattern at the barcode
54
Using the HC700-G
± 40 degrees
Scan/Picture Keys
Capturing Barcodes with the HC700-G
FIGURE 31.
Scan/Picture Key