Table of Contents
Advertisement
Note: If you use your network card with two networks, such as a private network at work and one at
home for the Internet, you will need to change the network to which the network card connects.
Set up a WAP gateway
To access WAP sites through Internet Explorer Mobile, configure your device to use a WAP gateway.
Use the following steps to create a new set of connections to the Internet with WAP gateway settings.
Viewing WAP sites is not supported on all devices.
Before you begin, obtain the following information from your ISP: ISP server phone number, user
name, and password. Also, contact your wireless service provider and ask for your WAP gateway
server name and port number.
Tap Start > Settings > Connections tab > Connections.
1.
Tap Edit my proxy server. If a proxy server has not been set up, tap Set up my proxy server.
2.
On the Proxy Settings tab, select the This network connects to the Internet and This network
3.
uses a proxy server to connect to the Internet check boxes.
If necessary, in the Proxy server box, enter the proxy server name.
4.
Tap Advanced > WAP.
5.
In the Server box, enter the WAP gateway server name. Under Port, enter the port number. The
6.
most common WAP port number is 9201.
Enter any logon credentials required by the WAP gateway server.
7.
Change modem connection settings
Before you begin, obtain the following information from your Internet service provider (ISP) or
wireless service provider: ISP server phone number or access point, user name, password, domain
name, and TCP/IP settings, if needed.
If your device does not have access to a mobile phone network, insert a modem card.
Tap Start > Settings > Connections tab > Connections.
1.
In either My ISP or My Work Network, tap Manage existing connections.
2.
Select the desired modem connection, tap Edit, and follow the instructions in the connection wiz-
3.
ard.
94
Wireless LAN Connection
Advertisement
Table of Contents
