4
Using the 2200 TapeStation System
Operating Procedure
Running System
Exposure to potentially dangerous mechanical parts
WA R N I N G
➔
Aborting the TapeStation Run
1 If, for any reason, you wish to abort an experiment, click the abort button
Aborting the experiment will irretrievably discard any progress made and samples loaded.
N O T E
Complete TapeStation Run
When finished, a pop up will ask for removal of the tip cartridge and tape.
1 Remove tip cartridge and tape.
2 Click OK.
34
Do not open the lid whilst the light is flashing.
on the pop-up controller. The instrument will ask:
a If you want to reset the instrument to begin another experiment – this
will return the controller software and TapeStation to the beginning of
the next experiment.
b If you want to close down the controller – this will close the controller
software and keep the TapeStation temporarily locked in its current
state.
2200 TapeStation