4
Using the 2200 TapeStation System
Operating Procedure
• A text file, raw gel image (bitmap), Word and Excel report can all be
Shutdown and Restarting Procedure
Shutdown Procedure
The controller software, TapeStation instrument and laptop should be shut down when not
N O T E
in use (preferably at the end of every working day).
Ensure that the TapeStation System is shut down in the following order:
1 Exit the TapeStation Controller Software.
2 Turn off the TapeStation instrument.
3 Power down the laptop.
Restarting Procedure
Ensure that the ScreenTape System is restarted in the following order:
1 Power up the laptop.
2 Turn on the TapeStation.
3 Start the TapeStation Controller Software.
38
•
Clicking Reset All will remove all manual changes and return the entire
tape to the automatically analysed state.
exported and saved for each run. In addition, the results can be sent
straight to the printer as a non-editable report. Selecting or de-selecting the
gel view will dictate whether it appears in the Word file and/or
straight-to-print report. The data is a visual representation of the
automatically launched .srf file. In Excel, a positive result is denoted by the
intensity value.
2200 TapeStation