Agilent Technologies 2200 TapeStation User Manual page 59

Table 8 Overview troubleshooting 2200 TapeStation images
Image Issue
A mark has appeared
in the lane which has
been detected and
annotated by
ScreenPlex.
The bands look
thicker than usual.
2200 TapeStation
Troubleshooting 2200 TapeStation ScreenPlex Images
Probable cause Solution
Dirt or specks of dust Deselect the annotated ghost band or run the lane
can adhere to the again.
outside of
ScreenTape.
The Loading Buffer Always ensure that lids are replaced tightly on the
has evaporated. This
Loading Buffer tube.
can either occur in If the samples are prepared in tubes, always run
the original tube or samples as soon as they have been prepared.
within the sample if If the samples have been prepared in a 96 well
kept in the 2200 plate, ensure that a foil seal has been used to
TapeStation for long
minimise evaporation.
periods of time.
6
Troubleshooting
59