How To Use The Screenplex Analysis Software - Agilent Technologies 2200 TapeStation User Manual

4
Using the 2200 TapeStation System
Operating Procedure

How to Use the ScreenPlex Analysis Software

Once the imaging is complete, the analysis software will automatically launch
the ScreenPlex Result File (extension .srf). The data provided includes the test
types selected (displayed in tabs), the date and time at which the samples
were run, the tape serial number and the system information. In addition,
each sample result and sample ID will appear.
• If a band is detected a + sign in a grey box is displayed, if no band is
• The numerical values next to the Detected Bands represent intensity levels
• Any absent internal controls and/or unidentified bands are detailed in the
• The analysed gel image can be viewed by selecting the View Gel tick box in
36
detected a - sign in a white box will be displayed.
relative to the top marker, which has arbitrarily been assigned a value of
100 .
table and highlighted with a warning sign. The gel image also contains the
corresponding warning signs. The image below illustrates both cases.
the top right hand corner of the ScreenPlex Result Viewer. The gel image
shows the top and bottom marker selection (using a < symbol) as well as the
sample band detection (using a grey arrow). Any unidentified bands are
2200 TapeStation