Agilent Technologies 2200 TapeStation User Manual page 29

6 Insert the ScreenTape into the TapeStation, with the label towards the front
Protect the individual gel lanes within the ScreenTape from excessive force. Do not bend or
N O T E
flex ScreenTape and store in the provided packaging at the recommended temperature,
when not in use.
TapeStation instrument will not recognize the screen tape if inserted incorrectly.
N O T E
The TapeStation will automatically recognise the sample plate type and ScreenTape and
N O T E
load the required parameters.
The TestKitSuite for ScreenTape DS12 will be automatically selected by the software and
N O T E
displayed under the ScreenTape details.
7 Prepare samples according to type as detailed in
8 Place samples into the sample block inside the TapeStation.
Damage to the 2200 TapeStation and impact on performance
C A U T I O N
➔
9 Select the tubes or wells you wish to run by clicking and dragging the mouse
2200 TapeStation
of the instrument and the barcode facing right.
samples" on page 39 or the appropriate Quick Guide.
Ensure the lids have been removed from the sample tubes.
over the sample locations.
• Selected wells will appear blue
• Any wells which are selected but not assigned a test will appear white
• Selected lanes on the controller ScreenTape image will appear blue
• Any lanes which are selected but not assigned a test, will appear black
Using the 2200 TapeStation System
Operating Procedure
"How to prepare your
4
29