3
Installing the System
Unpacking the System
Unpacking the System
Unpacking the Agilent 2200 TapeStation
Do not attempt to unpack the 2200 TapeStation instrument until you have read the accom-
Condensation within the instrument
C A U T I O N
Condensation will damage the system electronics.
➔
"Defective on arrival" problems
C A U T I O N
If there are signs of damage, please do not attempt to install the instrument. Inspection
by Agilent is required to evaluate if the instrument is in good working condition.
➔
➔
Personal injury
WA R N I N G
The TapeStation is heavy.
➔
1 Remove the TapeStation from the packaging and place on a clean, dry, flat
2 Allow the TapeStation to acclimatise to the ambient temperature of the
16
panying Site and Safety Manual.
If your instrument was shipped in cold weather, leave it in its box and allow it to
warm slowly to room temperature to avoid condensation.
Notify your local Agilent Representative and the Technical support channel.
An Agilent service representative will inspect the instrument at your site and
initiate appropriate actions.
Enlist the aid of a co-worker to share the lifting load to avoid personal injury.
surface.
operating environment.
2200 TapeStation