Auto Punch/Loop; Marker; Locate; V.fdr - Roland VS-2400CD Owner's Manual

When the generator is producing the metronome's sound, the metronome is no longer
routed directly to the MONITOR bus.

AUTO PUNCH/LOOP

The AUTOPUNCH/LOOP screen provides parameters for setting
Auto Punch and Loop start and stop times. To learn about using its
parameters for:
•
•

MARKER

Learn how to use the UTILITY menu's MARKER screen in "Editing
Markers" on Page 184.

LOCATE

The LOCATE screen is described in "Editing Locators" on Page 180.

V.FDR

The parameters on the V.FADER screens determine the MIDI
controllers to be transmitted from the VS-2400CD when its channel
strips are in V.FADER mode.
"V.Fader—The VS-2400CD MIDI Control Surface" on Page 286 describes how to use the
V.Fader feature that turns the VS-2400CD into a MIDI control surface.
At the top of the V.FADER/USER Param3 screen is the USER FADER ASSIGN to
parameter, described in "Controlling a Parameter of Your Choice" on Page 136.

SCENE

To learn how to use the SCENE screen, see "Editing Scenes" on
Page 141.

AUTOMIX

See "The AUTOMIX Screen" on Page 316 to learn about using the
AUTOMIX screen.
Roland VS-2400CD Owner's Manual
Auto Punch—see "Editing Auto Punch IN and OUT Points Manually" on Page 187.
Loop—see "Editing Loop FROM and TO Points Manually" on Page 175.
27—UTILITY Menu Parameters
www.RolandUS.com
UTILITY menu
F3 (A.P/LP)
UTILITY menu
F4 (MARKER)
UTILITY menu
F5 (LOCATE)
UTILITY menu
F6 (V.FDR)
UTILITY menu
F1 (SCENE)
UTILITY menu
F2 (A.MIX)
365