Fader Select Indicator; Aux Send Sliders - Roland VS-2400CD Owner's Manual
24tr/96khz/24-bit digital studio workstation
Hide thumbs
Also See for VS-2400CD:
- Appendices (156 pages) ,
- Service notes (49 pages) ,
- Mixer block diagram (1 page)
Table of Contents
Advertisement
33—VGA Main Display Mixer Views
FADER Select Indicator
On the VGA, a colored line appears beneath the set of channels currently assigned to
the VS-2400CD's physical channel strips. These channels are selected by pressing the
corresponding FADER button on the VS-2400CD (Page 134), or by clicking the virtual
FADER buttons in the Multi-Channels Strip view's MASTER fader strip (Page 428). This
allows you to tell at a glance if the channel strips you're viewing on the VGA are
currently being controlled by the 12 physical channel strips.
When a set of input channels are selected with the FADER buttons, they're underlined
in amber. When track channels are selected, the underline is green. Aux 1-8 and FX
return channels are underlined in red when they're being controlled by the faders.
Aux Send Sliders
In the Input Mixer/Master Block, Track Mixer/FX Return Mixer and Multi-Channel
views, input, track and FX return channels all sport Aux send sliders. These sliders
allow you to send the desired amount of a channel's signal to any of the eight Aux
busses, and show you at a glance each send level. To set an Aux send level, click and
drag its slider with your mouse to the desired position.
A slider's color provides information about its
Aux send. When a slider is:
•
•
•
•
You can change the Aux bus's pre/post setting:
•
•
•
•
When an odd/even pair of Aux busses is linked, the slider for the even bus is replaced
by a panning handle, as described on Page 425.
422
Amber indicator for input channels
Red indicator for Aux master channels
blue—the Aux send is on and set to Post.
red—the Aux send is on and set to Pre.
gray—the Aux send is turned off.
black—the send is turned all the way down.
on any channel's VGA CH VIEW screen (Page 413).
in the Input Mixer/Master Block view (described on Page 423).
in the MASTER EDIT window available in the VGA main display's MIXER menu
(Page 390).
in the track controls area in the playlist (Page 402).
www.RolandUS.com
Green indicator for track channels
Red indicator for Fx return channels
Blue=On, Pst
Gray=Off
Roland VS-2400CD Owner's Manual
Red=On, Pre
Black=No level
Advertisement
Table of Contents
