Ps/2 Mouse; Ps/2 Keyboard; Global - Roland VS-2400CD Owner's Manual

27—UTILITY Menu Parameters
OPERATION TARGET
The OPERATION TARGET parameter designates either the VS-2400CD's internal LCD
or a connected VGA monitor as the main operational display. The main display
responds to the VS-2400CD's top-panel controls, mouse and optional keyboard. All
messages also appear in the main display. When the internal LCD or external VGA
monitor is not selected as the main display, it acts as the VS-2400CD's Info Display.
You can quickly toggle this parameter by holding down SHIFT and pressing MASTER
EDIT•LCD↔VGA.
The main and info displays—as well as this parameter—are described in detail in
Chapter 29 starting on Page 381.

PS/2 MOUSE

For a description of the VS-2400CD's mouse settings, see Page 64.

PS/2 KEYBOARD

For a description of the VS-2400CD's ASCII keyboard settings, see Page 64.

GLOBAL

INPUT PEAK LEVEL
The INPUT PEAK LEVEL parameter sets the level at which the input peak indicators
on the Home screen and elsewhere light, as described on Page 122. You can set the
input peak indicators to light when a signal coming into an input channel reaches -6dB,
-3dB or 0dB—a light gray line across the input meters display (Page 120) shows the
current INPUT PEAK LEVEL value.
FOOT SWITCH ASSIGN
An optional foot switch—such as a Roland DP-2 or BOSS FS-5U—connected to the
VS-2400CD's rear panel FOOT SWITCH jack can perform a variety of functions. This
parameter determines what a connected foot switch does. You can set the parameter to:
•
356
Play/Stop—so you can start and stop project playback with the foot switch.
www.RolandUS.com Roland VS-2400CD Owner's Manual
UTILITY menu
F2 (GLOBAL)