32-Vga Main Display Ch View Screens; Displaying Ch Edit Parameters On The Vga; Universal Ch View Elements - Roland VS-2400CD Owner's Manual

32—VGA Main Display CH VIEW Screens
You can control the signal flowing through any input, track or FX return channel on its
VGA main display CH VIEW screen.
Input and
track channel
elements
To learn about the input and track channel CH EDIT parameters, see Chapter 11. The
FX return channels' CH EDIT parameters are described in Chapter 17.

Displaying CH EDIT Parameters on the VGA

You can display the desired CH VIEW screen by selecting it from
the MIXER menu. To view the CH VIEW screen for:
You can also:
•
•

Universal CH VIEW Elements

The CH VIEW screens for input, track and FX return channels differ slightly, though
they contain some common elements. The following section describes those elements.
Roland VS-2400CD Owner's Manual
This illustration shows an input channel's CH VIEW screen. The track
channel and FX return channel CH VIEW screens look slightly different.
• an input channel—select the desired input channel from
the CH VIEW (INPUT) submenu.
• a track channel—select the desired track channel from the
CH VIEW (TRACK) submenu.
• an FX return channel—select the desired FX return
channel from the CH VIEW (FX RTN) submenu.
press the desired channel's CH EDIT button on the VS-2400CD (see Page 134).
view a track channel's CH VIEW screen by clicking its track number in the VGA
main display's Home screen.
Aux send controls DIR 1-8
www.RolandUS.com
Input/output
control strip
411