Parameter - Roland VS-2400CD Owner's Manual
24tr/96khz/24-bit digital studio workstation
Hide thumbs
Also See for VS-2400CD:
- Appendices (156 pages) ,
- Service notes (49 pages) ,
- Mixer block diagram (1 page)
Table of Contents
Advertisement
19—Phrase Editing Operations
PARAMETER
Use: TRACK menu
The phrase PARAMETER phrase editing screen allows you to
independently set the level of each phrase on a track, and/or set it to
fade in and/or out.
Why You'd Use Phrase PARAMETER
You can smooth out any volume variations during recording, punching or editing by
adjusting the volumes of individual phrases. You can use the phrase fade-in and -out
tools to control the way that any phrase starts or ends.
PHRASE LEVEL
PHRASE LEVEL sets the volume of a phrase. You can boost its level by as much as 6 db,
or cut its level down to -∞. At 0 db, the phrase plays at its original recorded level.
If FADE IN TIME or FADE OUT TIME is set to less than 0.02 seconds, you may hear a
short "blip" during playback. If this occurs, lengthen the time setting.
FADE IN TIME, FADE OUT TIME
FADE IN TIME allows you to set the time over which the phrase's volume goes from
silence to its selected level at the start of the phrase. FADE OUT TIME allows you to set
the length of time it takes the phrase's volume to go from its selected level to silence at
the end of the phrase.
FADE IN CURVE, FADE OUT CURVE
You can set how the phrase's level changes during a fade by setting the corresponding
fade curve parameter. You can set FADE IN CURVE and/or FADE OUT CURVE to:
•
•
About Fade-Ins and Fade-Outs
Here are some things to consider as you set up a phrase fade-in or fadeout:
•
•
258
Linear—so the fade volume changes at the same rate over the course of the fade.
Exp—so that the fade volume changes exponentially.
If you start playback of a phrase in the middle of a fade-in—the fade length is shortened
so that it still ends at the desired time, resulting in an faster fade-in.
0 sec
10 sec
Phrase
Level
Playback starts
If the FADE IN TIME and FADE OUT TIME together are longer than the phrase—the
FADE OUT TIME is given priority and the FADE IN TIME is shortened accordingly.
www.RolandUS.com
0 sec
10 sec
Phrase
Level
Playback starts
Roland VS-2400CD Owner's Manual
TRACK menu
F1 (PARAM)
Advertisement
Table of Contents
