The Playlist's Measure Bar; Status Toggles - Roland VS-2400CD Owner's Manual

31—VGA Main Display Home Screen

20. Status Toggles

Beneath the track control areas are five status toggle buttons. You can click each button
to toggle the setting of the entire column of buttons directly above it.
Click this status toggle:
MUTE
SOLO
AUTOMIX STATUS
TRACK STATUS

The Playlist's Measure Bar

Just above the playlist is a gray strip called the "measure bar." The lines in the bar show
the project measures as defined by the project tempo map (Page 298). The time bar also
contains markers, CD track markers, edit point flags, punch points and loop points.
You can place any of these items at the desired locations using onscreen tools. To learn
how to place:
•
•
•
•
You can:
•
•
406
MUTE status toggle
SOLO status toggle
To:
un-mute all currently muted tracks.
un-solo all currently soloed tracks.
set the status of all Automix tracks to the same value.
set the TRACK STATUS of all tracks to the same value.
Marker CD Track Marker
Gold
Auto Punch Points
Punch in Punch out
When Auto Punch is on, a red bar
connects the red punch points.
markers—see "TAP" on Page 395.
edit points—see Page 408.
Auto Punch points—see Page 393.
loop points—see Page 393.
reposition an object in the measure bar—by moving your cursor over the object so the
cursor becomes a pointing finger, and then dragging to the desired new location.
clear an object in the measure bar—holding down CLEAR on the VS-2400CD,
positioning the mouse cursor over the object until it turns into a pointing finger,
and then clicking the object.
www.RolandUS.com
TRACK STATUS toggle
AUTOMIX STATUS toggle
(Red)
Blue
IN
Loop start
When looping is on, a blue loop box
connects the blue start and end points.
Roland VS-2400CD Owner's Manual
Edit Points
(Green)
OUT FROM
Loop Points
Loop end
TO