Input Mixer/Master Block View; Input Channel Strips - Roland VS-2400CD Owner's Manual

Input Mixer/Master Block View

Select INPUT MIXER/MASTER BLOCK from the MIXER menu to view all of the
VS-2400CD's 16 input channel strips and MASTER BLOCK settings at once on the
VGA.

Input Channel Strips

1. DYNAMICS (DYN) On/Off
Click this button to turn the channel's dynamics processor on—so the
button's lit—or off. See Page 149.
2. EQ On/Off
To turn the channel's EQ on or off, click this button. When it's lit, the
EQ's on. See Page 149.
3. AUX Send Sliders
Set the amount of the channel's signal sent to an Aux bus by adjusting
the corresponding AUX send slider. With linked Aux busses, a panning
handle replaces the even-numbered Aux bus's slider (Page 425).
4. MUTE (M) Button
To mute the channel, click this button so it's lit. To un-mute the channel,
click the button again.
5. SOLO (S) Button
To solo the channel, click the SOLO button to light it. To un-solo the
channel, click the button again.
Roland VS-2400CD Owner's Manual
FADER
button
indicator
Input Mixer
33—VGA Main Display Mixer Views
Master Block
www.RolandUS.com
1.
2.
3.
4.
5.
6.
7.
8.
9.
148
138
138
423