Roland VS-2400CD Owner's Manual page 469

Busses
When importing earlier V-Studio songs into the VS-2400CD, busses are re-assigned as
follows.
VS-880:
AUX A/B
FX1 A/B
FX2 A/B
EQ
When importing earlier V-Studio songs into the VS-2400CD, EQ parameters are re-
mapped as follows.
Effect Patches
This table notes the existence of certain VS-2400CD effect patches in earlier V-Studios.
* Speaker Modeling and the Mastering Tool Kit effects are available in the current VS-880EX and VS-1680
Attenuator
When an earlier V-Studio's song is imported, and when a VS-2400CD project is
exported, attenuator values are translated as follows.
Earlier V-Studio:
Roland VS-2400CD Owner's Manual
VS-880EX/890, VSR-880:
AUX1 L/R
AUX2 L/R (FX1 L/R)
AUX3 L/R (FX2 L/R)
—
—
VS-880/880EX/890, VSR-880:
EQL
EQM
EQH
VS-880: VS-880EX v. 1.x*
VS-1680 v. 1.x*:
— —
— —
— OK
— OK
— OK
— OK
operating system versions. Visit www.rolandus.com or call Roland Product Support for more info.
-42dB -42.0 to -39.1dB
-36dB -39.0 to -33.1dB
-30dB -33.0 to -27.1dB
-24dB -27.0 to -21.1dB
-18dB -21.0 to -15.1dB
VS-1680/1880:
AUX1 L/R (FX3 L/R)
— AUX2 L/R (FX4 L/R)
— AUX3 L/R (AUX L/R)
VS-1680/1880:
EQ Low
EQ Mid
EQ High
VS-880EX/890/1680/1880,
VSR-890:
VS-2400CD: Earlier V-Studio:
www.RolandUS.com
Supplemental Information
VS-2400CD
FX1 L/R AUX 1/2
FX2 L/R AUX 3/4
AUX 5/6
AUX 7/8
VS-2400CD:
Lo-Mid
VS-2400CD:
OK Speaker Modeling
OK Mastering Tool Kit
OK 3Band Isolator
OK Tape Echo
OK Analog Flanger
OK Analog Phaser
VS-2400CD:
-12dB -15.0 to -9.1dB
-6dB -9.0 to -3.1dB
0dB -3.0 to +2.9dB
+6dB +3.0 to +6.0dB
DIR 1/2
Lo
Hi
469