Roland VS-2400CD Owner's Manual page 306

23—MIDI and Synchronization
7. Set "SYNC MODE" to "INT."
"SYNC MODE" can be switched by holding down SHIFT and pressing NUMERICS•EXT
SYNC. If "SYNC MODE" is set to "INT," the EXT SYNC indicator will be lit.
8. Press the VS-2400CD's V-LINK button.
9. Press ENTER/YES.
Now the Edirol DV-7PR can be operated from the VS-2400CD.
For details on the functions that you can control in V-LINK mode and how to operate
the VS-2400CD, refer to "V-LINK function chart."
When operating the Edirol DV-7PR, the "Select a Clip Bank" operation listed in the
"V-LINK function chart" corresponds to switching the palette.
306
A dialog box will ask you for confirmation.
V-LINK mode will be turned on, and V-LINK will light.
www.RolandUS.com Roland VS-2400CD Owner's Manual