Multi-Channel View Input Channels - Roland VS-2400CD Owner's Manual

5. AUTOMIX STATUS Button
Click the AUTOMIX STATUS button to set the MASTER fader's
Automix status when Automix is turned on.
6. MASTER Bus Balance Knob
Drag the MASTER bus balance knob up or down to shift the MASTER bus output right or
left, respectively.
7. MASTER Bus Fader
Drag the MASTER bus fader up or down to set the level of the MASTER
bus—this is the same thing as moving the physical MASTER fader on
the VS-2400CD. The current MASTER bus level is shown beneath the
fader.
8. DITHER
To activate output dithering, click and hold the DITHER button and
select the desired dithering bit depth.

Multi-Channel View Input Channels

1. Input Signal Selector
Click the input signal selector to select the desired
input signal for the channel. Odd-numbered
inputs can be assigned to odd-numbered input
channels, and even-numbered inputs to even-
numbered input channels.
2. PHASE (INV) Button
Click the PHASE button so it lights to reverse the
phase polarity of the input channel's signal.
3. ATT Knob
The ATT knob sets the level of the signal coming
into the channel as shown to the left of the knob.
4. DYNAMICS (DYN) Switch and Overview
Turn on the channel's dynamics processor by clicking the DYN
switch so it lights. The selected type of dynamics processor is shown
beneath the switch along with the current dynamics curve.
5. EQ Switch and Overview
Turn on the channel's EQ by clicking the EQ switch so it lights. The
current EQ curve appears below the switch.
Roland VS-2400CD Owner's Manual
33—VGA Main Display Mixer Views
160
150
148
www.RolandUS.com
318
137
359
1.
2.
3.
4.
5.
6. 7.
9.
8.
11.
10.
12.
13.
14.
149
149
429