Snapping To Grid - Roland VS-2400CD Owner's Manual
24tr/96khz/24-bit digital studio workstation
Hide thumbs
Also See for VS-2400CD:
- Appendices (156 pages) ,
- Service notes (49 pages) ,
- Mixer block diagram (1 page)
Table of Contents
Advertisement
1. Press HOME•DISPLAY and use the
2. To prepare to trim:
3. To trim:
4. Release the mouse button to execute the trim.
You can drag a phrase's edge as far as the beginning or end of the take on which the
phrase is based, and no further.
Snapping to Grid
When you've set up a tempo map (Page 298) for your project, you can turn on the Home
screen's Track Edit Grid feature.
When the grid is active, the front edge of a phrase or region you're dragging "snaps" to
the nearest gridline as you drag. You can have a gridline for every measure or beat. To
place the audio at the gridline, release the mouse button after the snap. If you're
dragging a group of phrase or regions, the first one you select snaps to the grid, and the
others retain their positions relative to that first phrase or region.
To turn on the Track Edit Grid feature:
1. Right-click on the Home screen's playlist.
2. Select GRID from the Edit Pop-Up menu——the Grid Options window opens.
3. Select the desired grid setting. You can select:
If you can't see the grid, hold down SHIFT and press
gridlines appear.
You can snap any edit point to a gridline by setting the UTILITY Menu's GLOBAL
GRID MODE parameter (Page 358) as desired. To:
•
•
You can temporarily disable the grid feature by holding down CLEAR on the
VS-2400CD as you drag edit points or audio.
Roland VS-2400CD Owner's Manual
magnification as desired.
•
the front of a phrase—hold the mouse cursor over the
phrase's leading edge until the trim in cursor appears.
•
the back of a phrase—hold the mouse cursor over the
phrase's trailing edge until the trim out cursor appears.
•
the front of the phrase—click and drag to the right.
•
the back of the phrase—click and drag to the left.
•
Off—so the grid is turned off.
•
Measure—for a gridline at the start of every measure.
•
Beat—for a gridline for every beat in the project.
•
1/2, 1/4, 1/8, 1/16, 1/32—for a gridline at each selected beat division.
If you select any value other than Off, the grid appears immediately in
the playlist.
snap only TO edit points to gridlines—set GRID MODE to Only TO.
snap all edit points to gridlines—set GRID MODE to ALL EDIT POINT.
,
,
and/or
buttons to set the display's
This illustration shows
measure gridlines.
or
to zoom in or out until the
www.RolandUS.com
18—Editing Tracks
Trim in
Trim out
243
Advertisement
Table of Contents
