Roland VS-2400CD Owner's Manual page 159
24tr/96khz/24-bit digital studio workstation
Hide thumbs
Also See for VS-2400CD:
- Appendices (156 pages) ,
- Service notes (49 pages) ,
- Mixer block diagram (1 page)
Table of Contents
Advertisement
4. Interactive EQ Display
The interactive EQ display shows you the settings of the four EQs. Each equalizer is
represented by a triangle.
You can change a band's gain and frequency values on the interactive EQ display with
your mouse by dragging its triangle:
•
•
5. Low Band EQ
The Low EQ band operates on all frequencies below the selected
frequency. It has a:
•
•
The low band EQ is a shelving-type EQ that affects the level of all frequencies below
the selected frequency, as well as a narrow range of frequencies slightly above it. As
such, it requires no Q setting.
6. Lo-Mid Band EQ
The Lo-Mid EQ band is a parametric EQ that contains a:
•
•
•
Although this EQ is called the "Lo-Mid" band, its wide range of frequency values
means that you can use it to adjust the level of any frequencies in a signal, low or high.
7. Hi-Mid Band EQ
The Hi-Mid EQ band is a parametric EQ that contains a:
•
•
•
Although this EQ is called the "Hi-Mid" band, its wide range of frequency values
means that you can use it to adjust the level of any frequencies in a signal, high or low.
Roland VS-2400CD Owner's Manual
Low band
left or right to lower or raise, respectively, change its frequency.
down or up to lower or raise, respectively, its gain.
frequency selector—that sets the center frequency, from 20 Hz to 1.00 kHz.
gain control—that raises or lowers the level of the selected frequency range. It can
be set anywhere from -15.0 dB to 15 dB.
frequency selector—that sets the center frequency, from 20 Hz to 20.0 kHz.
gain control—that raises or lowers the level of the selected frequency
range. It can be set anywhere from -15.0 dB to 15 dB.
Q—that sets the width of the affect range of frequencies, from 0.36 to 16.0.
frequency selector—that sets the center frequency, from 20 Hz to 20.0 kHz.
gain control—that raises or lowers the level of the selected frequency
range. It can be set anywhere from -15.0 dB to 15 dB.
Q—that sets the width of the affect range of frequencies, from 0.36 to 16.0.
11—Input and Track Channel Tools
Lo-Mid band Hi-Mid band
Frequency
www.RolandUS.com
High band
The dotted vertical
lines help you see
where you are as
you drag a triangle.
159
Advertisement
Table of Contents
