Channel Fader - Roland VS-2400CD Owner's Manual

33—VGA Main Display Mixer Views
3. SOLO (S) Button
To solo the fader group, click the SOLO button to light it. To un-solo the
group, click the button again.
4. AUTOMIX STATUS (A) Button
When Automix is turned on, repeatedly click the AUTOMIX STATUS
button to set the fader group's Automix status.

5. Channel Fader

Drag a fader group's onscreen fader up or down to set the fader group's level—this is
the same as moving its physical fader.
436 www.RolandUS.com Roland VS-2400CD Owner's Manual
138
318