Quick-Selecting From The Track Menu - Roland VS-2400CD Owner's Manual

Quick-Selecting from the TRACK Menu

You can use Quick Selection for all phrase and region operations except the phrase
Take Manager, and the region IMPORT and ARRANGE edit operations.
When you select and begin an editing operation that requires the selection of phrases
or regions, the TRACK STATUS buttons—and sometimes the SELECT buttons—start to
flash. You use these buttons to quick-select the tracks that contain the desired phrases
or regions. When you select the track:
•
•
If you quick-select a phrase or region on one of a pair of linked tracks, the phrase or
region on the other linked track is also quick-selected.
To quick-select source tracks and destination tracks when moving, copying or exchanging audio:
1. If necessary, press Tr 1-12 or TR 13-24 to display the track channels that
2. Press the SELECT button of a source track—it lights solidly in green to
3. If you want to select a different destination track, press its TRACK
4. To include another set of source and destination tracks, press the new
Each time you select a new source track, subsequent destination track selections apply
to that source—you can't go back and select a different destination track for a source
you selected earlier.
5. Press the new destination track's TRACK STATUS button.
6. To remove a set of source and destination tracks, press the source track's SELECT
If you'd like to change an earlier set of source/destination tracks, press the source
track's SELECT button, and then set it up again the way you want it.
The V-Track map on the display shows you the V-Tracks that are currently
selected for editing. Any V-Track with a wide, flashing black box is a source. Any
V-Track with a wide, flashing white box is a destination.
Quick Selection always select the destination track's currently active V-Track. To select a
different destination V-Track, use the onscreen selection tools.
Roland VS-2400CD Owner's Manual
any phrase on the track that's touching the now line is selected. If there's no phrase
touching the now line, the track will not let itself be selected. Move the now line so
it touches the desired phrase, and then select it.
any region of audio on the track between the IN and OUT points is selected—see
"Placing Edit Points on a TRACK Menu Operation Screen" on Page 246. If there's
no audio on the track between the IN and OUT points, the track cannot be selected.
include the track you want to select.
show that the audio comes from that track.
By default, the same track is selected as the destination track. Its
TRACK STATUS buttons light red to show this.
STATUS button so it turns red.
source track's SELECT button.
button—the source and destination tracks' SELECT and TRACK STATUS buttons
flash to show they're no longer selected.
www.RolandUS.com
18—Editing Tracks
247