Changing The Effect Of The Pedal (Left Pedal); Preventing Doubled Notes When Connected To A Sequencer (Local Control); Midi Transmit Channel Settings (Midi Transmit Ch.); Changing The Language Displayed In The Screen (Language) - Roland F701 Owner's Manual

Convenient Functions
Indication

Changing the Effect of the Pedal (Left Pedal)

When you turn on the power, the left pedal functions as a soft pedal (p. 7, p. 11). You can change the function of the pedal to
a variety of other operations. By assigning a function to the pedal, you can instantly change a setting by pressing the pedal while
you perform.
Left Pedal
Sostenuto
Play/Stop
Layer
MIDI-related settings

Preventing Doubled Notes When Connected to a Sequencer (Local Control)

When you have a MIDI sequencer connected via USB, set this parameter to Local Off.
Since most sequencers have their Thru function turned on, notes you play on the keyboard may be sounded in duplicate, or
get dropped. To prevent this, you can enable the "Local Off" setting so that the keyboard and internal sound generator will be
Local Control
disconnected.
Off
On

MIDI Transmit Channel Settings (MIDI Transmit Ch.)

MIDI
This setting specifies the MIDI channel on which the unit will transmit.
Transmit Ch.
This unit will receive all sixteen channels (1–16).
Off, 1–16
Overall operation settings

Changing the Language Displayed in the Screen (Language)

Language
You can change the language that is displayed in the screen.
English, Japanese, Chinese

Adjusting the Brightness of the Display (Display Contrast)

Display
Contrast
You can adjust the brightness of the display.
1–10

Specifying the Time Until the Operating Panel Dims (Screen Saver)

When no operation has been performed for a specified length of time, the display will go blank and the operating panel button
Screen Saver
LEDs will go dark. The display reappears when you perform an operation.
You can specify the time until the panel goes dark.
Off, 30 sec., 1 min. (default value), 5 min., 10 min.

Specifying a Maximum Volume (Volume Limit)

You can specify a maximum volume value. This lets you prevent loud sound from being produced unintentionally.
Volume Limit
MEMO
You can also set the volume limit by turning the [ ] knob while holding down the [ ] button and the [ ] button.
20, 40, 60, 80, 100

Outputting Sound Both from Headphones and Internal Speakers (Speaker Auto Mute)

With the factory settings, sound is no longer output from the internal speaker when you connect headphones to the PHONES
Speaker Auto
jack. However, you can change this setting so that sound is output both from the headphones and from the internal speakers.
Mute
* If this is "Off, " the sound that is output from the headphones will have a different character.
Off
On
34
Value Explanation
The pedal functions as a sostenuto pedal.
The pedal has the same function as the [s] button.
Pressing the pedal will layer on Tone 2, used for Dual Play.
* This is available only when using Dual Play.
Local Control is off.
The keyboard is disconnected from the internal sound generator. Playing the keyboard will not produce sound.
Local Control is on. The keyboard is connected to the internal sound generator.
Sound is heard both from headphones and the internal speakers.
Sound is heard only from the headphones (default value).