To Set Up The Display System - Rigol DS1074B User Manual

RIGOL

To Set up the Display System

The menu button for the display system on the front panel is shown in the following
figure.
Press the Display button, the interface menu for settings shows as follows.
Figure 2-66 Table 2-38 The Display menu (Page 1/3)
Menu
Type
Clear
Persist
Intensity
2-54
Display Setup Button
Figure 2-65 The display setup button
Setting
Vectors
Dots
Infinite
OFF
<
waveform
>
intensity
Comments
Display waveforms as vectors.
Display waveforms as dots.
Clear all existing waveforms from
screen.
The sample points remain displayed
until turn the persistence "OFF".
Turn off the persistence function.
Set up waveform intensity (0% to
100%).
User's Guide for DS1000B series