RIGOL
To Set Up the Display System
Figure 2-61 shows the menu button for the display system on the front panel.
Press the Display button, the interface menu for settings shows as follows.
Figure 2-62
Table 2-35 The Display menu (Page 1/3)
Key points
Display type: Display type includes Vector and Dot. In vectors type,
oscilloscope connects dots through digital interpolation including both linearity
and sin(x)/x. Sin(x)/x interpolation is suitable for Real-time sampling and will
be more effective at 50ns or faster time base.
2-48
Display Setup Button
Figure 2-61 Display button
Menu
Setting
Vectors
Type
Dots
Clear
OFF
Persist
Infinite
Intensity
<
percentage
Comments
Display waveforms as vectors.
Display waveforms as dots.
Clear all existing waveforms from
screen.
Turn off the persistence function.
The sample points remain displayed
until turn the persistence "OFF".
Set up waveform intensity
>
(0%~100%).
User‟s Guide for DS1000CA Series