Print Setting
DS1000E, DS1000D series oscilloscopes support print function. Please execute print
operation according to the following steps:
1. Connect printer:
DS1000E, DS1000D series oscilloscopes provide two print modes: "Normal" and
"PictBridge".
If use PictBridge printer, please select "PictBridge" mode, and then connect the
oscilloscopes regarded as "Device equipment" and printer via USB Device port
on the rear panel.
If use Normal printer, please select "Normal" mode, and then connect the
oscilloscopes regarded as "Host equipment" and printer via USB Host port on
the front panel.
© 2008 RIGOL Technologies, Inc.
nd Quality Products Online at:
Figure 2- 108
PictBridge print
Figure 2- 109
Normal print
User's Guide for DS1000E, DS1000D Series
GlobalTestSupply
www.
RIGOL
.com
sales@GlobalTestSupply.co
2-79