Parameter Tables - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Profibus Communication
6.3 Parameter Assignment/Addressing
6.3.2

Parameter Tables

Network Parameters
Table 6-8 Network Control Menu (9943)
Parameter ID
Net Control Type 9944
Start Stop Control 9945
Table 6-9 Network 1 to 2 Register Copy (9946)
Parameter ID
Net 1 to 2 reg. copy 9946
Network 1 Parameters
Table 6-10 Network 1: Configure Menu (9900)
Parameter ID
Network 1 Type 9901
Table 6-11 Network 1: Configure Parameters Menu (9902)
Parameter ID
Profibus Address 9904
Velocity Units 9080
146
Unit Default
Sop
Maintained
Unit Default
Function
Unit Default Min
None
Unit Default Min
2 2
%
Min Max Description
Set bit definition:
● SOP
● Fixed
Set Start/Stop bit inputs:
● Maintained
● Momentary
Min Max Description
Copy Network 1 registers to Network 2
registers.
Max Description
Designate the type of external network connected to
the drive:
● None
● Modbus
● DeviceNet
● Profibus
● Ethernet Modbus
● ControlNet
● Ethernet I/P
Max Description
124 Set the address of the node on the Profibus network.
Designate the units for velocity values from the drive:
● %
● RPM
● Hz
NXGpro Communication
Function Manual, AB, A5E33486415A