8.1.1
Anybus DeviceNet Module
Description
The following figure shows the connector, switches and status indicators on the Anybus™
DeviceNet™ module.
1
2
3
4
5
Figure 8-1
Connector
The module supports the following connectors:
● 3.84 mm pluggable screw connector
● 5.08 mm pluggable screw connector
● 10-pin 2 mm board-to-board connector. The following figure shows the pin assignments.
NXGpro Communication
Function Manual, AB, A5E33486415A
Connector to NXGpro Fiber Optic Board
DeviceNet connector
Configuration switches (not used)
Status indicators
Anybus watchdog
Anybus DeviceNet Module
DeviceNet (Profile 12) Communication
8.1 Description
191