Siemens SINAMICS PERFECT HARMONY GH180 Function Manual page 218

ControlNet Communication
9.1 Description
9.1 Description
The drive supports ControlNet™ communication via the Anybus-S™ ControlNet™ module.
ControlNet™ communication functions in the following way:
● The Anybus-S™ ControlNet™ module is classified as a ControlNet™ adapter, that is, the
module cannot originate connections on its own, but a scanner node can open a connection
to the module. The module is implemented according to the ControlNet™ International
specification for a communication adapter (Profile 12).
● The module has 2 BNC contacts for connection to the ControlNet™ network.
Additional information about ControlNet™ is available from www.controlnet.org.
To enable dual network functionality, this protocol requires an additional Anybus™ module.
9.1.1 Anybus ControlNet Module
Description
The following figure shows the connector, switches and status indicators on the Anybus™
ControlNet™ module.
1
2
3
4
5
6
7
8
Figure 9-1
218
Connector to NXGpro Fiber Optic Board
Network Access Port (NAP)
ControlNet Channel A
ControlNet Channel B
MacID switch (x10)
MacID switch (x1)
Status indicators
Anybus watchdog
Anybus ControlNet Module
NXGpro Communication
Function Manual, AB, A5E33486415A