Table 9-13 Network 1: Register Data To Drive Menu (9600) - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Table 9-13 Network 1: Register Data to Drive Menu (9600)
Parameter
Data To Drive Reg 01
Data To Drive Reg 02
Data To Drive Reg 03 to 64 9603 to
Network 2 Parameters
Table 9-14 Network 2: Configure Menu (9914)
Parameter ID
Network 2 Type 9915
Table 9-15 Network 2: Configure Parameters Menu (9916)
Parameter ID
ControlNet Address 9939
ControlNet Header 9957
Velocity Units 9924
Demand Scalar 9926
Aux Demand Scalar 9927
NXGpro Communication
Function Manual, AB, A5E33486415A
ID Unit Default
9601 Fixed Reg
Bits
9602 Velocity De‐
mand
None
9664
Unit Default Min
None
Unit Default Min
9 1
Off
%
1 -125
1 -125
9.3 Parameter Assignment/Addressing
Min Max Description
Register data to drive parameter 1.
Register is not programmable.
Register data to drive parameter 2.
Register is not programmable.
Register data to drive parameters 3 to 64.
Registers are programmable.
Max Description
Designate the type of external network connected to the
drive:
● None
● Modbus
● DeviceNet
● Profibus
● Ethernet Modbus
● ControlNet
● Ethernet I/P
Max Description
99 Set the address of the node on the ControlNet network.
Set the ControlNet header:
● Off
● On
Designate the units for velocity values from the drive:
● %
● RPM
● Hz
125 Set the scalar for input demand reference from the
network.
125 Set the auxiliary scalar for input demand reference
from the network.
ControlNet Communication
227