Modbus Communication Network Connections
Modbus™ network communication is shown below.
A
B
B
=
Figure 3-1
Typical 2-wire Modbus Communication Connection
3.1.2
Siemens Modbus Module
Description
The Siemens Modbus™ module supports Modbus™ communication. The module plugs into
the Anybus 1 (ABUS1) connector or the Anybus 2 (ABUS2) connector on the fiber optic board,
as shown in Figure
The following figure shows the connector and status indicators on the Siemens Modbus™
module.
NXGpro Communication
Function Manual, AB, A5E33486415A
A
B
A
NXGpro Control in the Introduction Chapter.
Modbus Communication
3.1 Description
B
A
37