Parameter Read/Write
E.1 Setting up the PTD and PFD registers
E.1
Setting up the PTD and PFD registers
The following menus and submenus provide access for setting up the PFD and PTD registers:
● Communications Menu (9)
● Submenu Network 1 Configure (9900)
● Submenu Network 2 Configure (9914)
Select PFD and PTD registers using the pick lists listed in the
The pick lists include the available registers as follows:
● Data from Drive registers for use in IDs 9403 to 9464:
– PFD1
– PFD2
– PFD3
– PFD4
● Data to Drive registers for use in IDs 9603 to 9664:
– PTD1
– PTD2
– PTD3
– PTD4
Note
Place each set of 4 registers in sequential IDs.
Each register performs a specific function.
304
Planning/Configuring Chapter.
NXGpro Communication
Function Manual, AB, A5E33486415A