Table 3-13 Network 1: Register Data From Drive Menu (9400); Table 3-14 Network 1: Register Data To Drive Menu (9600); Table 3-15 Network 2: Configure Menu (9914) - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Table 3-13 Network 1: Register Data from Drive Menu (9400)
Parameter
Data From Drive 01
Data From Drive 02
Data From Drive 03 to 64
Table 3-14 Network 1: Register Data to Drive Menu (9600)
Parameter
Data To Drive Reg 01
Data To Drive Reg 02
Data To Drive Reg 03 to 64 9603 to
Network 2 Parameters
Table 3-15 Network 2: Configure Menu (9914)
Parameter ID
Network 2 Type 9915
NXGpro Communication
Function Manual, AB, A5E33486415A
ID Unit Default
9401 General Sta‐
tus
9402 Motor Speed
9403 to None
9464
ID Unit Default
9601 Fixed Reg
Bits
9602 Velocity De‐
mand
None
9664
Unit Default Min
None
3.3 Parameter Assignment/Addressing
Min Max Description
Register data from drive parameter 1.
Register is not programmable.
Register data from drive parameter 2.
Register is not programmable.
Register data from drive parameters 3 to 64.
Registers are programmable.
Min Max Description
Register data to drive parameter 1.
Register is not programmable.
Register data to drive parameter 2.
Register is not programmable.
Register data to drive parameters 3 to 64.
Registers are programmable.
Max Description
Designate the type of external network connected to the
drive:
● None
● Modbus
● DeviceNet
● Profibus
● Ethernet Modbus
● ControlNet
● Ethernet I/P
Modbus Communication
47