DencoHappel ZGF.1E series Operation Manual page 73

Flex-Geko Fan Coil Unit
6.6.1 Mounting control panel on Flex-Geko
PR-2011-0115-GB • Subject to modifications • R4-12/2015
NOTICE!
Completely assembled control panel can be mounted on the basic unit. The fol-
lowing installation manual is only valid for a subsequent retrofitting of a control
panel.For this purpose an additional room or return air sensor is required.
Fig. 6-10: Opening control panel
Front panel
Pos. 1:
Mounting plate
Pos. 2:
• Use a screwdriver to lock out the front panel and remove the latter to top of the
mounting plate, as shown in Fig. 6-10.
Safety and User Instructions
2
1
73