DencoHappel ZGF.1E series Operation Manual page 64

Safety and User Instructions
64
wired to undocumented terminals. In such a way it is possible to assign different
RPM combinations to the three speed stages (see Tab. 6-3).
NOTICE!
The factory performed assignment of the terminals depends on the speed com-
bination selected by the customer.
Possible speed
combination
A, K
B, L
C, M
E, O
H, R
Free selection (example)
* = motor cable wired to a supporting terminal.
Tab. 6-3: Speed combinations
Changing fan speed
• Wire the motor cable according to Tab. 6-3or arbitrary selection. At the same
time the higher speed stage should correspond to a higher motor RPM.
Motor cable, cable colour
White Red Grey
Motor speed stage
1 2
Terminal assignment (switch position)
1 2
* 1
* *
1 *
1 2
1 2
PR-2011-0115-GB • Subject to modifications • R4-12/2015
Flex-Geko Fan Coil Unit
Orange Black
3 4 5
3 * *
2 3 *
1 2 3
2 * 3
3 4 5
* * 3